- #1
I freshly built a new Microcomputer and I reused my EVGA 2080 ti XC Ultra from the experienced PC. Modo, CPU and everything else is new.
Everything is working fine except the GPU fans, that do not spin. The GPU itself is fine and it works. I cause probably tried most of the common solutions I have seen more or less but nothing works. The fans of an older GPU (750 ti) spins fine in the new mobo but the 2080 ti fans no more spin in some the old and new mobos. I accept tried force back-spin the fans as I usage to serve in my older PC with Afterburner operating room EVGA precision software, but nothing. Also tried some stress test with the same results. I presume that I have damaged either the fans or the sports fan controller when cleaning IT before installing it in the new mobo. Fans are tightly adjacent and cables are non damaged. My guess is the teensy-weensy circuit where fans are attached, which I may have damaged when cleansing the poster since I did not notice it was there.
Anyway, I do not privation to mess around and I definite to hardly replace the whole cooling thing and I would wish to ask for advice. What are my options? I have seen these AIO but I am not secure which one should I get. I have found the "official AIO" from EVGA but it is discontinued. My card has the reference point PCB if that helps. I do not mind if the solution is pricy, just befuddle Maine everything you own. I bash not have much experience in GPU thus my preferred choice would live something that involves a screw and some connectors, smooth if it is expensive.
- Oct 7, 2009
- 40,822
- 2,258
- 137,590
- 7,627
- #2
Have you proved deshrouding the GPU and inspecting the make and simulate of the fans used connected the GPU? Perhaps you can use Aliexpress operating theatre Ebay to hunt behind a set of fans meant for the identity card?
- Oct 6, 2014
- 18,505
- 943
- 86,690
- 4,176
- #4
Thank you for the telecasting. This is something I could do and it does not seem very difficult.
A naive interview. With this new fans, how are GPU temperatures monitored? Is it the same way as with the stock fans? I know they have sensors someplace but I am not confident if they need the smaller tour where the stock fans are attached to curb that.
- #5
Thank you for your help Lutfij!Welcome to the forums, entran!Have you tried deshrouding the GPU and inspecting the make and model of the fans used happening the GPU? Perhaps you can use Aliexpress operating theatre Ebay to hunt down a sic of fans meant for the add-in?
While I cannot be 100% sure, I brawl not think the fans itself are faulty. I opine it is the small circuit where the fans are connected. It is like-minded half-size rectangular and flexible while plate with lots of stuff in there. It is facing the long side of the radiator. Sorry I cannot explain it punter.
- Oct 6, 2014
- 18,505
- 943
- 86,690
- 4,176
- #6
The temps should theme the comparable as ever only not control the fan fastness.Thank you for the video. This is something I could do and it does not seem very difficult.A naive dubiousness. With this new fans, how are GPU temperatures monitored? Is it the same way as with the descent fans? I know they take over sensors somewhere but I am not sure if they need the small circuit where the stock fans are attached to control that.
Basically plug the fans into the motherboard and run them full bucket along all the prison term.
- #7
Ok that makes sense thank you.The temps should report the same as always but not control the sports fan speed.
Basically sparking plug the fans into the motherboard and execute them full speed all the time.
I already bought 2 x 120 mm fans and volition follow the video you recommended.
- Advertising
- Cookies Policies
- Secrecy
- Full term & Conditions
- Topics
How Do You Oil the Fan on a Philllips Hsb2313a/f7
Source: https://forums.tomshardware.com/threads/cooling-options-for-evga-2080-ti-xc-ultra-reference-pcb-after-fan-failure.3743379/
0 Komentar
Postar um comentário